Tec-Spiral
Request a quote
0
0
中文 English
Home > Products > Cutting Tools > Hole Saw
T.C.T Hole Saw for Thick Plate Material
◆ Carbide tipped cutting edge welded to the tough alloy steel body
◆ Special Multi-Cut design(3-ply)help to remove chips and reduce cutting resistance
◆ High cutting speed, High wear resistance and considerably longer tool life
◆ Ideal for high alloy and stainless steels, non-ferrous and light metals and reinforced fabrics
◆ Applications: Drill flat materials, tubes, vaulted surfaces, overlapped holes possible
◆ Work with portable electric or pneumatic tools, vertical drill machines etc.
◆ Effective length: 28mm
◆ Equipped with Ф7mm HSS Pilot Drill and Ejector Spring for piloting and removing the cutted piece.
◆ 14-65mm(9/16"-2 9/16")hole cutter and shank in one piece
◆ 67-152mm(2 5/8"-6")hole cutter and shank in separated
Variants
  • Cutter Dia Metric
  • Cutting Depth
  • ◆ Carbide tipped cutting edge welded to the tough alloy steel body
    ◆ Special Multi-Cut design(3-ply)help to remove chips and reduce cutting resistance
    ◆ High cutting speed, High wear resistance and considerably longer tool life
    ◆ Ideal for high alloy and stainless steels, non-ferrous and light metals and reinforced fabrics
    ◆ Applications: Drill flat materials, tubes, vaulted surfaces, overlapped holes possible
    ◆ Work with portable electric or pneumatic tools, vertical drill machines etc.
    ◆ Effective length: 28mm
    ◆ Equipped with Ф7mm HSS Pilot Drill and Ejector Spring for piloting and removing the cutted piece.
    ◆ 14-65mm(9/16"-2 9/16")hole cutter and shank in one piece
    ◆ 67-152mm(2 5/8"-6")hole cutter and shank in separated

    ◆ Always wear safety glasses
    ◆ Keep hands, hair and loose clothing away from all rotating tools
    ◆ Use oil or other coolants on most metal work pieces, except cast iron
    ◆ Hold the saw firmly and drill perpendicular to the work surface
    ◆ Apply sufficient pressure to enable the saw to cut freely. Clear chips away from area frequently
    ◆ Operate the saw at the recommended speeds for the material being cut and the diameter of the saw. Never exceed the recommended operating speed
    ◆ Avoid excessive heat generation on the cutting surface
    · Applicable for pipes and sheets such as wood, plastic, steel, cast iron, non-ferrous and light metals
    · Work with portable electric or pneumatic tools, vertical drill machines, lathe, boring/milling machines etc.
    Have you selected all the products? If yes, please click Yes to submit.