|
|
|
 |
|
|
|
CARBIDE
BURR |
| Double
Click , Auto Scroll Windows |
Renew Date: 2009-4-21 ; Views 1058
hits |
 |
The
high-performance tungsten carbide rotary burrs provide maximum
cutting edge stability with a simultaneous high tenacity of
the cutting edge.
Tungsten Carbide Burr are ideal for shaping, smoothing and
material removal. The tungsten ones are used on hardened steel,
stainless steel, cast iron, nonferrous metals, fired ceramics,
plastic, hard wood, especially on hard materials whose hardness
can be above HRC70. To de-bur, break edges, trim, pro-cess
welding seams, surface processing.
The product has long time operation life and its application
range is widely, you can use different shape product according
to your application. Use higher speeds for hard woods, slower
speeds for metals and very slow speeds for plastics ( to avoid
melting at the point of contact).
The carbide burr are mainly driven by hand electric tools
or pneumatic tools (also can be used on machine tool). The
rotary speed is 8,000-30,000rpm;
|
| Tooth Type Choice: |
|
 |
Aluminum cut burrs are
for use on nonferrous and nonmetallic materials. It is
designed for rapid stock removal with minimum chip loading. |
 |
Chip Breaker cut burrs will reduce
sliver size and improve operator control at a slightly
reduced surface finish. |
 |
Coarse Cut burrs are recommended for
use on soft material such as copper, brass, aluminum,
plastics, and rubber, where chip loading is a problem. |
 |
Fine Cut bur Creating a fine surface finish, suitable for Hardened
steel (HRC40-60), heat resisting metals, Nickel Based Alloys, Cobalt Based Alloys, Stainless Steel.
|
 |
Diamond Cut burrs are very effective
on heat treated and tough alloy steels. They produce very
small chips and good operator control.Surface finish and
tool life is reduced. |
 |
Double Cut: Chip size is reduced and
tool speed can be slower than normal speeds. Allows for
rapid stock removal and better operator control. |
 |
Speed Way Carbide Burr
Patented in China (Pantent No: ZL03229221.X), Europe,
and U.S.A.
Unique flute design: fine pitch and coarse pitch flutes
for rapid material removal, while maintaining a smooth
surface finish. |
 |
Standard Cut: A general purpose tool
designed for cast iron, copper, brass and other ferrous
materials. It will give good material removal and good
work piece finishes. |
| |
|
|
| |
Note:
In order to protect you from flying smear metals, please always
wear safety goggles. |
|
Previous <-: VANE STEP
Next:-> COUNTERSINKS
|
Print |
Close Windows |
|
|
HOME 
